Installer Manual Fleck 5800 - XTR - Programming
74 / 122 Ref. MKT-IM-006 / B - 16.01.2018
6.4.3.4 Filter metered immediate or delayed
day override/time-driven: Adjust the day override.
regen. time: Adjust the regeneration time.
vol. override/volumetric: Adjust the volume of water treated between regenerations.
Press to save and return to master settings screen or press to return to the master settings
screen without saving.
6.4.4. Regeneration screen
From the master settings screen press the regen. button to display the regeneration screen.
Note
Adjusting regeneration settings may turn set relays OFF depending of the regeneration
settings adjust and of the relay set. Any required relays will need to be reprogrammed in the
relay output screen.
Valve
vol. override/
volumetric
regen. time
1 d
02:00 am
day override/
time-driven
3.0
m
3
Regeneration
regen flow downflow
To Next Page
Loading...
