Installer Manual Fleck 5800 - XTR - Maintenance
104 / 122 Ref. MKT-IM-006 / B - 16.01.2018
9.2.9. Replacing the seals and spacers cartridges
No. Operation
A Remove the piston, see “Replacing the piston and/or the brine valve”, page 100.
B Remove the seals and spacers cartridge (1).
C Change the seals and spacers cartridge (1).
D Lubricate the seals and spacers cartridge (1) with approved silicone grease.
E Reverse above procedure steps to rebuild.
To Next Page
Loading...
