125
Settings
6
You can play back all recorded images on your CF card successively. To start
continuous playback, use the menu screen displayed on the LCD monitor.
1
Press the Playback button and use the four-way controller
(45) to select the image to start the slideshow.
2
Select [Slideshow] on the Main Menu and press the four-
way controller (5) to display the [Slideshow] settings
screen.
3
Press the four-way controller
(45) to change the playback
interval.
Select from 3 sec, 5 sec, 10sec, 15 sec,
20 sec and 30 sec.
4
Press the OK button.
Playback will start at the specified interval.
Lock the mirror in the up position for cleaning the CCD.
See page 149 for cleaning the CCD.
1
Select [Sensor Cleaning] on the Main menu.
2
Press the four-way controller (5) to display the [Sensor
Cleaning] screen.
Setting the Slideshow
• Pressing the shutter release button, four-way controller or the MENU button
during continuous playback will stop the slideshow.
• Slideshow stops when after one loop.
Sensor Cleaning
Slideshow
Playback interval time
3 sec
: :
MENU
OK
Exit Start
To Next Page
Loading...
