132
Connecting
7
Connecting to a TV
By using the video cable (I-VC2), you can play back images using a TV or
other equipment with a video IN jack as your monitor. Make sure that both
the TV and the camera are turned off before connecting the cable.
1
Connect the video cable to the PC / Video terminal on the
camera.
2
Connect the other end of the video cable to the video IN
jack on the TV.
3
Turn on the TV and the camera.
• If you intend to use the camera continuously for a long period, use of the AC
adapter D-AC10 (optional) is recommended. Please refer to the operating
manual of the TV or other connected equipment.
• You can set a custom function to turn the LCD monitor on while connected to
a TV. See page 115 for setting Custom Functions.
To Next Page
Loading...
