61
Shooting Functions
4
• To change shutter speed
The camera switches to shutter speed-priority AE when you turn the b
dial in the e (Hyper Program) mode.
• Shutter speed can be set to a value within the range appropriate for the
aperture value.
• The aperture values on the LCD panel and in the viewfinder will flash
when the brightness changes and the aperture value falls outside the
appropriate range.
• The camera returns to Hyper Program mode when you press the green
button.
• To change aperture value
The camera switches to Aperture-priority AE when you turn the c dial in
the e (Hyper Program) mode.
• Aperture can be set only to a value within the range appropriate for the
shutter speed value.
• The shutter speeds on the LCD panel and in the viewfinder will flash
when the brightness changes and the shutter speed value falls outside
the appropriate range.
• The camera returns to Hyper Program mode when you press the green
button.
Hyper Program
To Next Page
Loading...
Need help?
General
