1
Introduction
23
D3
Wireless Memory Card
Sets the camera action for when an Eye-Fi card or a Flucard is
used.
– p.78
Reset
Resets the settings of the direct keys and for the items of the A
menu, C menu, B menu, D menu, control panel, and
playback mode palette.
––
D4
Pixel Mapping
Maps out and corrects any defective pixels on the CMOS sensor.
– p.86
Dust Alert
Detects dust adhering to the CMOS sensor and visually displays
the location of the dust on the monitor.
– p.87
Dust Removal Cleans the CMOS sensor by shaking it. – p.86
Sensor Cleaning
Locks the mirror in the up position for cleaning the CMOS sensor
with a blower.
– p.87
Format Formats a memory card. – p.31
Firmware Info/Options Displays the camera’s firmware version. – –
Custom Setting Menu
Menu Item Function Default Setting Page
E1
1. EV Steps Sets the adjustment steps for exposure. 1/3 EV Steps p.37
2. Sensitivity Steps Sets the adjustment steps for ISO sensitivity. 1 EV Step p.39
3. Meter Operating Time Sets the meter operating time. 10sec. –
4. AE-L with AF Locked
Sets whether to lock the exposure value when the focus is locked.
Off –
5. Link AE and AF Point
Sets whether to link the exposure and AF point in the focusing
area.
Off p.40
6. Auto EV Compensation
Sets whether to automatically compensate when the proper
exposure cannot be determined.
Off –
7. Bulb (B) Mode Options
Sets the camera operation when pressing the shutter release
button in M mode.
Mode1 –
E2
8. Bracketing Order Sets the order for Exposure Bracketing shooting. 0 - + p.49
9. One-Push Bracketing
Sets whether to shoot all frames with one release when using
Exposure Bracketing.
Off p.49
10. WB Adjustable Range
Sets whether to automatically fine-tune the white balance when
the light source is specified for the white balance setting.
Fixed p.53
11. WB When Using Flash Sets the white balance setting for when using flash.
Auto White
Balance
p.53
Menu Item Function Default Setting Page
To Next Page
Loading...
Need help?
General
Weight and Dimensions
