4
Playback
67
5 Set the parameters.
Available operations
6 Press E.
The save confirmation screen appears.
7 Select [Apply additional filter(s)], [Save to SD1]
or [Save to SD2], and press E.
Select [Apply additional filter(s)] when you want to apply
additional filters to the same image. The screen of Step 3
reappears.
u Caution
• Only JPEG and RAW images captured with this camera can
be edited with the digital filters.
t Memo
• Up to 20 filters, including the digital filter used during shooting
(p.56), can be applied to the same image.
Retrieves the filter effects of the selected image and applies the
same filter effects to other images.
1 Display a filter-processed image in single image
display.
2 Select T in the playback mode palette.
3 Select [Recreating filter
effects] and press E.
The filter effects used for the
selected image appear.
4 To check the parameter
details, press G.
Press G again to return to the
previous screen.
5 Press E.
The image selection screen appears.
6 Use Q to select an
image for applying the
same filter effects, and
press E.
You can only select an image
saved in the same memory card
that has not been processed with a filter.
The save confirmation screen appears.
7 Select [Save to SD1] or [Save to SD2] and press
E.
t Memo
• If [Searching for the original image] is selected in Step 3, the
original image prior to digital filter application can be
retrieved.
AB Selects a parameter.
CD Adjusts the value.
Brightness
Cancel
OK
Recreating Filter Effects
OKOK
MENU
Recrea ting f ilter e ffectsRecreating filter effects
Search ing fo r the o rigina l imageSearching for the original image
Applyi ng the digita l filt erApplying the digital filter
Reappl ies fo llowing digit al filt er
Reapplies following digital filter
effect s from previo us ima ge
effects from previous image
OK
Details
100-0001
20.
19.
18.
17.
16.
--
--
--
--
--
--
--
15.
14.
13.
12.
11.
10.
9.
8.
7.
6.
5.
4.
3.
2.
1.
Perfor ms dig ital fi lter
Performs digital filter
proces sing t o this image
processing to this image
OK
100-0001