2
Getting Started
29
4 Close the card cover, and
slide it in the direction of
4.
u Caution
• Do not remove the memory card while the card access lamp
is lit.
• If the card cover is opened while the power is on, the camera
will turn off. Do not open the cover while the camera is in use.
• Use this camera to format (initialize) a memory card that is
unused or has been previously used on other devices. (p.31)
• Use a high-speed memory card when recording movies. If a
write speed cannot keep up with a recording speed, the
writing may stop during recording.
t Memo
• For details on how the data is recorded when two memory
cards are inserted, refer to “Memory Card Settings” (p.35).
• When using an Eye-Fi card or a Flucard, refer to “Using a
Wireless Memory Card” (p.78).
Turn the camera on and make the initial settings
1 Turn the main switch to
[ON].
The first time the camera is
turned on after purchasing, the
[Language/W] screen
appears.
t Memo
• The power will automatically turn off when you do not perform
any operations within a set period of time. (Default setting:
1min.) You can change the setting in [Auto Power Off] of the
D3 menu.
1 Use ABCD to select the desired language and
press E.
The [Initial Setting] screen
appears in the selected
language.
Proceed to Step 6 if F
(Hometown) does not need to be
changed.
2 Press B to move the frame to F and press D.
The [F Hometown] screen appears.
3
4
Initial Settings
Turning the Camera On
Setting the Display Language
Initial Setting
Settings complete
Cancel
English
New York
Text Size
Standard
To Next Page
Loading...
Need help?
General
Weight and Dimensions
