Pentax K-3 - White Balance Settings and Adjustments

3
Shooting
52
In C mode, you can use [Interval Movie Record] to take still
pictures at a set interval from a set time and save them as a
single movie file (Motion JPEG, file extension: .AVI).
1 Turn the Stills/Movie switch to C and press A.
The Drive Mode screen appears.
2 Select Y and press B.
3 Set the shooting
conditions.
4 Press E to finish the setting.
The camera returns to standby mode.
5 Press the shutter release button to start
shooting.
When [Start Interval] is set to [Now], the first picture is taken.
Instant Review is displayed, and then the monitor turns off.
After the set number of pictures are taken, the camera
returns to standby mode.
t Memo
• The shortest interval time that can be set for [Interval] is 10
seconds for [Digital Filter] and 20 seconds for [HDR Capture].
1 Press C in standby mode.
The White Balance setting screen appears.
2 Select the White Balance.
Available operations when shooting with the
viewfinder
Proceed to Step 5 if you do not need to change the
parameters.
Interval Movie Record
Recorded
Pixels
Select from z, u, or t.
Interval
Select from 2 sec., 5 sec., 10 sec., 20 sec., 30
sec., 1min., 5 min., 10 min., 30 min., or 1 hour.
Recording
Time
Set the time from the start to the end of recording.
Select from 14 seconds to 99 hours. The time that
can be set varies depending on the [Interval] setting.
Start
Interval
Select whether to take the first picture now or
at a set time.
When [Set Time] is selected, set the time at
which to start shooting in [Start Time].
2sec.
2sec.
Cancel
Cancel
OK
OK
Interv al
Interval
Record ed Pix els
Recorded Pixels
Interv al Mov ie Reco rd
Interval Movie Record
Record ing Time
Recording Time
Start Interv al
Start Interval
00 : 00 ' 14"
00: 00' 14"
Now
Now
Setting the White Balance
Y
g
g Auto White Balance
u Multi Auto White Balance
h Daylight
i Shade
j Cloudy
k
q Fluorescent - Daylight Color
r Fluorescent - Daylight White
s Fluorescent - Cool White
t Fluorescent - Warm White
l Tungsten
m Flash
n Color Temperature Enhancement
o Manual White Balance 1 to 3
p Color Temperature 1 to 3
Main switch to U Uses Digital Preview to preview
the background image with the
white balance effect applied.
H
Saves the preview image (only
when the data is available).
Auto W hite B alance
Auto White Balance
Cancel
Cancel
Check
Check
WB ±
WB ±
OK
OK