5
Settings
75
t Memo
• Refer to “List of World Time Cities” (p.94) for cities that can be
selected as a hometown or destination.
• Select [F Hometown] in Step 3 to change the city and DST
settings for the hometown.
• G appears in the control panel when [Time Setting] is set to
G.
Most of the functions set on this camera are saved even if the
camera is turned off. For the following function settings, you can
select whether to save the settings (T) or to return the settings
to their default values (S) when the camera is turned off. The
default settings are S for Digital Filter and HDR Capture, and
T for other functions.
Set in [Memory] of the A4 menu.
t Memo
• When [Reset] of the D3 menu is performed, all Memory
settings return to the default values.
You can protect images from being accidentally deleted.
u Caution
• Even protected images are deleted if the inserted memory
card is formatted.
1 Select Y in the playback mode palette.
The screen for selecting the unit for processing appears.
2 Select [Select image(s)] or
[Select a folder] and press
E.
3 Select the image(s) or folder to protect.
Refer to Step 2 of “Deleting Selected Images” (p.60) for how
to select the image(s) or a folder.
Proceed to Step 5 if [Select a folder] is selected.
4 Press G.
The confirmation screen appears.
5 Select [Protect] and press E.
t Memo
• To protect all images stored in the memory card, select
[Protect All Images] of the B1 menu.
Selecting Settings to Save in the
Camera
A4
Flash Mode
Drive Mode
White Balance
Custom Image
Sensitivity
EV Compensation
Flash Exposure Compensation
Digital Filter
HDR Capture
Composition Adjust.
Playback Info Display
File Management Settings
Protecting Images from Deletion
(Protect)
Select a folder
Select image(s)
OK
To Next Page
Loading...
Need help?
General
Weight and Dimensions
