4
Playback
69
6 Press F.
The screen of Step 3 reappears.
7 Press E.
The save confirmation screen appears.
8 Select [Save to SD1] or [Save to SD2] and press
E.
t Memo
• Select dividing points in chronological order from the
beginning of the movie. When canceling the selected dividing
points, cancel each of them in reverse order (from the end of
the movie to the beginning). In an order other than specified,
you can neither select frames as a dividing point nor cancel
the selections of the dividing points.
You can develop RAW images into JPEG images, and save
them as a new file.
1 Select b in the playback mode palette.
The screen for selecting a RAW image processing option
appears.
2 Select the desired option and press E.
When [Select single image] is selected, proceed to Step 6.
The image/folder selection screen appears.
3 Select the image(s) or a folder.
Refer to Step 2 of “Deleting Selected Images” (p.60) for how
to select the image(s) or a folder.
4 Press G.
The screen for selecting the parameter setting method
appears.
5 Select the parameter
setting method and press
E.
6 Set the parameters.
Available operations
For Image Capture Settings and Lens Correction, press D
and use AB to select an item.
For White Balance, Custom Image and Digital Filter, press
D to display the setting screen.
7 Press E.
The save confirmation screen appears.
RAW Development
Select single
image
Develops an image.
Select multiple
images
Develops up to 500 images with the
same settings.
Select a folder Develops up to 500 images in the
selected folder with the same settings.
Develop
images as shot
Allows you to change Image Capture
Settings (File Format, JPEG Recorded
Pixels, and JPEG Quality).
Develop
images with
modified
settings
Allows you to change Image Capture
Settings (File Format, Aspect Ratio,
JPEG Recorded Pixels, JPEG Quality,
Color Space), Lens Correction
(Distortion Correction, Lat-Chromatic-Ab
Adj, Peripheral Illumin. Corr., Color
Fringe Correction), White Balance,
Custom Image, Digital Filter, HDR,
Sensitivity, High-ISO NR, and Shadow
Correction.
AB Selects a parameter.
CD Changes the value.
Q Selects a different image (when in single
image display).
100
_
0505
001/500
Develo p imag es as s hot
Develop images as shot
Develop images with
modified settings
OK
100-0001
Image Capture Settings
To Next Page
Loading...
Need help?
General
Weight and Dimensions
