3
Shooting
40
You can set the Noise Reduction
setting when shooting with a high ISO
sensitivity in [High-ISO NR] of the
A2 menu.
When [Custom] is selected, select
[Setting] and set the noise reduction
level according to the ISO sensitivity.
Choose the part of the sensor to use for measuring brightness
and determining exposure.
1 Turn R while pressing
2.
t Memo
• In [5. Link AE and AF Point] of the E1 menu, you can set the
camera to adjust the exposure automatically according to the
position of the focusing point.
Noise Reduction when Shooting with a
High ISO Sensitivity
A2
Auto
Applies Noise Reduction at optimally calculated
levels throughout ISO range. (Default setting)
Low/
Medium/
High
Applies Noise Reduction at constant chosen
level throughout ISO range.
Custom
Applies Noise Reduction at user-defined levels
for each ISO setting.
Off
Does not apply Noise Reduction at any ISO
setting.
High-ISO NR
Auto
Low
Medium
High
Custom
Off
Cancel
OK
High-ISO NR
Reset
1 2
100
200
400
800
1600
3200
6400
AE Metering
A
Multi-
segment
The sensor meters the brightness in multiple
different zones. (Default setting)
In backlit locations, this mode automatically
adjusts exposure.
B
Center-
weighted
Metering is weighted at the center of the
sensor.
The sensitivity increases at the center and no
automatic adjustment is performed even
during backlit scenes.
C Spot
The brightness is measured only within a
limited area at the center of the sensor.
Useful when the subject is small.
12345
12345
1/
F
250
3200
5.6
To Next Page
Loading...
Need help?
General
Weight and Dimensions
