9
⑦ Discharge the main capacitor
Lift up the A301 then discharge the main capacitor by using 100Ω-1kΩ resistor.
(Discharge between Blue and Brown (gray) soldering land on T750.)
⑧ Disconnect T51 flex board from connector. (Slide lock)
⑨ Unsolder lead 5 wires.
⑩ A301
⑪ A27 (Water proof sheet)
3. A150 and A201（Front cover・Back cover）
① Disconnect T920 flex board from connector. (Plug-in connector)
② Screw (x2)
③ Screw … Peel off the grip rubber.
④ Screw
⑤ A150
100～1kΩ
⑦
⑧
⑨
Blue
Black
Brown
Gray
Green
⑪
①
②
④
⑤
③
To Next Page
Loading...
