Pentax Q - Page 134

132
Shooting Settings
5
2 Use the four way controller (2345) to select [Custom
Image], and press the 4 button.
The Custom Image setting screen appears.
After turning the power on, if you have taken any images before pressing
the 4 button, the last image taken is displayed in the background.
3 Use the four-way controller
(2345) to select an image
finishing tone.
4 Press the mc button.
The screen to select a parameter appears.
5 Use the four-way controller (23)
to choose a parameter you want
to change.
The following parameters can be changed according to the selected
image finishing tone.
I
Image Tone Parameter
Bright/Natural/Portrait/
Landscape/Vibrant/Radiant
Saturation: -4 to +4
Hue: -4 to +4
High/Low Key Adj: -4 to +4
Contrast: -4 to +4
Sharpness/Fine Sharpness: -4 to +4
MENU
Bright
Bright
Parameter Adj.
Parameter Adj.
Cancel
Cancel
OK
OK
OK
Saturation
Saturation
Cancel
Cancel
OK
OK
OK
MENU