133
Shooting Settings
5
*1 For [Favorite 1-3], you are required to save the settings of a cross processed image
as a favorite in advance through the playback mode palette. (p.134)
6
Use the four-way controller (45) to change the settings.
The background image changes according to the settings.
You can check the saturation and hue with the radar chart.
Available operations
7
Press the 4 button.
The screen that was displayed in Step 3 appears again.
Muted/Bleach Bypass
Saturation: -4 to +4
Toning: Off/Green/Yellow/Orange/Red/
Magenta/Purple/Blue/Cyan
High/Low Key Adj: -4 to +4
Contrast: -4 to +4
Sharpness/Fine Sharpness: -4 to +4
Reversal Film Sharpness/Fine Sharpness: -4 to +4
Monochrome
Filter Effect: None/Green/Yellow/Orange/
Red/Magenta/Blue/Cyan/Infrared Filter
Toning: Off/Green/Yellow/Orange/Red/
Magenta/Purple/Blue/Cyan
High/Low Key Adj: -4 to +4
Contrast: -4 to +4
Sharpness/Fine Sharpness: -4 to +4
Cross Processing Random/Preset 1-3/Favorite 1-3 *1
E-dial Switches between [Sharpness] and [Fine Sharpness].
(Not available in C mode.)
d/i button Resets the set value.
Image Tone Parameter
To Next Page
Loading...
