Pepwave Peplink MAX Series User Manual

using this method, select the appropriate version using the V1/V2 controls. The
security level of this method is known to be very high.
When WPA/WPA2- Personal
is configured, a shared key is used for data encryption
and authentication. When using this configuration, the Shared Key
option should be
enabled. Key length mu
st be between eight and 63 characters (inclusive). The security
level of this method is known to be high.
NOTE:
When WPA2/WPA3- Personal
is configured, if a managed AP which is NOT WPA3
PSK capable, the AP Controller will not push those WPA3 and WPA2/WPA3
SSID to
that AP.
Access Control
Restricted
Mode
The settings allow the administrator to control access using MAC address filtering.
Available options are None, Deny all except listed, and Accept all except listed
MAC Address
List
Connection coming from the MAC addresses in this list will be either den
ied or
accepted based on the option selected in the previous field.
If more than one MAC address needs to be entered, you can use a carriage return to
separate them.
RADIUS Server Settings
Host
Enter the IP address of the primary RADIUS server and, if applicable, the secondary
RADIUS server.

Pepwave Peplink MAX Series Specifications

General

Brand	Pepwave
Model	Peplink MAX Series
Category	Network Router
Language	English