Authentication
If an authentication method is used, select one from this drop-
options are MD5 and Text. Authentication key(s) may be input next to the drop-
down menu after selecting an authentication method.
Interfaces
Select the interface(s) that this area will use to listen to and deliver RIPv2 packets.
OSPF & RIPv2 Route Advertisement
PepVPN Route
Isolate PepVPN peers from each other. Received PepVPN routes will not be
forwarded to other PepVPN peers to reduce bandwidth consumption..
Network
Networks to be advertised over OSPF & RIPv2. If no network is selected, all LAN /
VLAN networks will be advertised by default.
Static Route
Advertising
Enabling OSPF & RIPv2 Route Advertising allows it to advertise LAN static routes
over OSPF & RIPv2. Static routes on the Excluded Networks table will not be
advertised.
22.2 BGP
Click the Network tab along the top bar, and then click the BGP item on the sidebar to
configure BGP.
Click the "x" to delete a BGP profile.
Click "Add" to create a new BGP profile.
To Next Page
Loading...
Need help?
General
