You have a choice between 2 different OpenVPN Client profiles:
● "route all traffic" profile
Using this profile, VPN clients will send all the traffic through the OpenVPN tunnel
●
"split tunnel" profile
Using this profile, VPN clients will ONLY send those traffic designated to the untagged
LAN and VLAN segment through the OpenVPN tunnel.
23.3 PPTP
No additional configuration required.
The Point-to-Point Tunneling Protocol (PPTP) is an obsolete method for implementing virtual
private networks. PPTP has many well known security issues
Continue to configure authentication method.
23.4 Authentication Methods
Authentication Method
Connect to
Network
Select the VLAN network for remote users to enable remote user access on.
Authentication
Determine the method of authenticating remote users
User accounts:
This setting allows you to define the Remote User Accounts.
Click Add to input username and password to create an account. After adding the user accounts,
you can click on a username to edit the account password.
Note:
The username must contain lowercase letters, numerics, underscore(_), dash(-), at sign(@),
and period(.) only.
The password must be between 8 and 12 characters long.
To Next Page
Loading...
Need help?
General
