Pepwave Peplink MAX Series - MAX BR1 Pro 5 G

LAN and Ethernet WAN Ports
Green LED
ON 1000 Mbps
OFF 10 Mbps / 100 Mbps or port is not connected
Orange LED
ON Port is connected without traffic
Blinking
Data is transferring
OFF
No data is being transferred or port is not connected
Port Type Auto MDI/MDI-X ports
2.27 MAX BR1 Pro 5G
2.27.1 Panel Appearance
2.27.2 LED Indicators
The statuses indicated by the front panel LEDs are as follows:
Status Indicators
Status
OFF System initializing
Red Booting up or busy
Blinking red
Boot up error
Green
Ready