When DES is selected, an entry field will appear for the password.
28.8 SMS Control
SMS Control allows the user to control the device using SMS even if the modem does not have
a data connection. The settings for configuring the SMS Control can be found at System>SMS
Control.
Supported Models
● Balance/MAX: *-LTE-E, *-LTEA-W, *-LTEA-P, *-LTE-MX
● EPX: *-LW*, *-LP*
When this box is checked, the device will be allowed to take actions according to received
commands via SMS.
Make sure your mobile plan supports SMS, and note that some plans may incur additional
charges for this.
SMS Control can reboot devices and configure cellular settings over signalling channels, even
if the modem does not have a data connection.
For details of supported SMS command sets, please refer to our knowledge base
.
SMS Control Settings
Enable
Click the checkbox to enable the SMS Control.
Password
This setting sets the password for authentication -
maximum of 32 characters, which
cannot include semicolon (;).
White List
Optionally, you can add phone number(s) to the whitelist. Only matching phone
numbers are allowed to issue SMS commands. Phone nu
E.164 International Phone Numbers format.
To Next Page
Loading...
Need help?
General
