CHAPTER 5
106 PerkinElmer Life and Analytical Sciences
PID#
This is the Positive (Sample) Identification number. Enter the cassette number
(located on the end of each cassette) that is used to hold each sample. Position
one in the cassette corresponds to Sample #1 in the worklist.
Note: If you have empty cassette positions, the corresponding
sample in the Worklist should be left blank.
Sample Name
Enter descriptive names for each sample number. The maximum characters
entered is twenty-five.
Insert Row
Click this button to add a blank row to the Sample Order table.
Delete Row
Click this button to delete selected rows from the Sample Order table.
Delete All
Click this button to delete all rows from the Sample Order table.
Sample Library
Click this button to display the Sample Library window. This window is used to
create lists of frequently used sample names for the Sample List Library.
Import Worklist
Sample ID names that have been saved in ASCII format may be imported into
Worklist. Click this button if you would like to import a worklist. The Import
Worklist window is displayed. Select the file you would like to import as a worklist
and click Open.
About the imported file:
The file must have the exact header with the exact
case and punctuation as shown in the example below. This is the format used by
the Export Worklist function.
To Next Page
Loading...
