HOW TO...
PerkinElmer Life and Analytical Sciences 17
How to Associate an Assay to a Protocol
1. Select the protocol to which you would like to associate an assay.
Figure 2-10 Protocol Tree.
2. Right click on that protocol flag number.
3. From the menu that is displayed, select Associate Assay. The Associate Assay
window is displayed.
4. Select the Assay that you would like to associate to a protocol flag number.
Click the Open button. The Data Paths window is displayed.
5. In the Data Paths window, enter a User ID for the assay.
6. Enter an Additional Header, if necessary.
To Next Page
Loading...
