EasyManua.ls Logo

PerkinElmer QuantaSmart 1694267

PerkinElmer QuantaSmart 1694267
218 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ADVANCED FEATURES
PerkinElmer Life and Analytical Sciences 141
To identify an unknown nuclide in your sample:
1. Load your sample(s) into a cassette. Attach the Priostat flag in the reset
position to the cassette.
2. Select Identify Nuclide from the Run menu. The Sample Priostat window is
displayed.
3. Select Count from the Run menu. Sample counting will commence immediately
after the instrument identifies the Priostat flag.
4. Stop the counting of a sample by selecting Stop from the Run menu.
5. Select Next Sample followed by Count from the Run menu if you would like to
count additional samples.
6. Stop the sample counting procedure by selecting End Sample Priostat from the
Run menu. An output window is displayed which provides you with the identity
of the nuclide.

Table of Contents

Related product manuals