ADVANCED FEATURES
PerkinElmer Life and Analytical Sciences 149
To preview sample counting using the Alpha Beta Preview feature, you will need
to perform the following tasks:
1. Load your sample(s) into a cassette. Attach the Priostat flag in the reset
position to the cassette.
2. Select Alpha Beta Preview from the Run menu. The Sample Priostat window is
displayed.
3. Select Count from the Run menu. Sample counting will commence immediately
after the instrument identifies the Priostat flag.
4. Stop the counting of a sample by selecting Stop from the Run menu.
5. Select Next Sample followed by Count from the Run menu if you would like to
count additional samples.
6. Stop the sample counting procedure by selecting End Sample Priostat from the
Run menu.
To Next Page
Loading...
