CHAPTER 2
14 PerkinElmer Life and Analytical Sciences
8. Select the Assay that you would like to associate to a protocol flag number.
Click the Open button. The Data Paths window is displayed.
Figure 2-7 Data Paths Window.
9. In the Data Paths window, enter a User ID for the assay.
10. Enter an Additional Header, if necessary.
11. Enter an Output Data Path, if you would like the data to be saved in a directory
other than the default.
In the following example, the default path is:
C:\Packard\TriCarb\Results\2800TR\14c_cpm
12. Attach the appropriate protocol flag in reset position.
13. Load the cassette(s) with samples.
14. Load the instrument with cassettes.
15. Press the (green start flag) button to begin counting. Do not use the
system’s CD writer while the instrument is counting.
To Next Page
Loading...
