Safety
CAUTION: Do not move the fully assembled unit. Use both hands when lifting or moving any part
of the system. Carry each part from the bottom.
Cleaning the System
Clean the outer surfaces of the system by wiping them with a damp cloth and common laboratory
cleaner.
System Ventilation
For adequate ventilation of this equipment, a distance of 15cm must be kept from this unit and any
other surfaces.
Electrical Safety
Use proper plugs and good earth ground connections.
For systems operating at voltages other then 115 volts AC or 220 volts AC, a
locally approved 3-prong plug may be required to correctly power the system.
Wiring Specifications
Live (L) Brown lead
Neutral (N) Blue lead
Earth (E) Green/yellow lead
WARNING
WARNING
To Next Page
Loading...
Need help?
General
