14 SEBU8603-01
Safety Section
Crushing Prevention and Cutting Prevention
i02143194
Crush ing Prevention and
Cutting Preve
ntion
Support the component correctly when work beneath
the component is performed.
Unless other maintenance instructions are provided,
never attempt adjustments while the engine is
running.
Stay clear of all rotating parts and of all moving
parts. Lea
ve the guards in place until maintenance
is performed. After the maintenance is performed,
reinstall the guards.
Keep objects away from moving fan blades. The fan
blades will throw objects or cut objects.
When objects are struck, wear protective glasses in
order to avoid injury to the eyes.
Chips or other debris may fly off objects when objects
are struck. Before objects are struck, ensure that no
one w ill
be injured by flying debris.
i04016709
Moun ting and Dismo unting
Do not climb on the engine or the engine
aftertreatment. The engine and aftertreatment have
not been designed with mounting or dismounting
locations.
Refer to the OEM for the location of foot and hand
holds for your specific application.
i03550790
Hig
h Pressure Fue l Lines
Contact with high pressure fuel may cause fluid
p
enetration and burn hazards. High pressure fu-
el spray may cause a fire hazard. Failure to fol-
low these inspection, maintenance and service in-
s
tructions may cause personal injury or death.
To Next Page
Loading...
