EasyManua.ls Logo

Perkins 1206E-E66TA - Diesel Fuel Requirements

Perkins 1206E-E66TA
120 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SEBU8603-01 69
Maintenance Section
Refill Capacities
i04224221
Fluid Recommendations
•
Glossary
•
ISO International Standards Organization
•
ASTM American Society for Testing and Materials
•
HFRR High Fr
equency Reciprocating Rig for
Lubricity testing of diesel fuels
•
FAME Fatty
Acid Methyl Esters
•
CFR Co-ordinating Fuel Research
•
ULSD Ultra Low Sulfur Diese l
•
RME Rape M
ethyl Ester
•
SME Soy Methyl Ester
•
EPA Environmental Protection Agency of the
United States
•
PPM Parts Per Million
•
DPF Dies
el Particulate Filter
Genera
l Information
NOTICE
Every
attempt is made to provide accurate, up-to-date
information. By use of this document you agree that
Perkins Engines Company Limited is not responsible
for er
rors or omissions.
NOTICE
These recommendations are subject to change with-
out notice. Contact your local Perkins distributor for
the most up-to-date recommendations.
Diesel Fuel Requirements
Pe
rkins is not in a position to continuously evaluate
and monitor all worldwide distillate diesel fuel
specifications that are published by governments and
te
chnological societies.
The Perkins Specification for Distillate Diesel Fuel
pr
ovides a known reliable baseline in order to judge
the expected performance of distillate diesel fuels
that are derived from conventional sources.
Satisfactory e
ngine performance is dependent on the
use of a good quality fuel. The use of a good quality
fuel will give the following results: long engine life
and acceptabl
e exhaust emissions levels. The fuel
must meet the minimum requirements that are stated
in the table 17.
NOTICE
The footnot
es are of the key part Perkins Specifica-
tion for Distillate Diesel Fuel Table. Read ALL of the
footnotes.

Table of Contents