Message Conventions
LAN/WLAN Data Export
2-12 Efficia CM Series Data Export Guide
This OBR segment identifies the type of data as ALARM. The alarm occurred at 12:45:00
pm on May 10, 2014 and were collected by OPERATOR12.
OBR||||ALARM|||20140510124500|||OPERATOR12<CR>
The following table describes each field in the OBR segment.
Observation/Result (OBX) Segment
Each OBX segment in the ORU message reports a single result or alert. There can be
multiple OBX segments in an ORU message.
An OBX segment can report the following:
• Measurement results
• Alerts (physiological alarms)
• Weight and Height of the patient
Results
This section describes the OBX segment that reports trend data.
Examples:
These OBX segments contain the following trend data: SpO
2
(98%), Systolic NBP (122
mmHg), diastolic NBP (85 mmHg), mean NBP (98 mmHg), Heart Rate (80 bpm), Pulse
Rate (85 bpm) derived from SpO
2
, end tidal CO
2
(5.7 kPa), airway respiration rate (23
rpm), inspired minimum CO
2
(0.0 kPa); and temperature (99.1°F). All of the results are
final.
Seq Field Description DT Len Usage Min Max Table Sample Value
4 Universal
Service
Identifier
The identifier
code for the
requested
measurement.
CE 250 R 1 1
4.1 identifier Identifies the
type of result.
Valid values are:
• MONITOR
• ALARM
ST 20 R 1 1 MONITOR
or
ALARM
7 Observation
Date/Time
Date and time of
the
measurement.
TS 26 R 1 1
7.1 Date/Time Timestamp in
the format
YYYYMMDDHH
MMSS.
NM 20 R 1 1 20140510124500
10 Collector
Identifier
Identifies the
person
collecting the
measurements.
XCN 20 RE 0 1
10.1 ID number The ID of the
person
collecting the
measurements.
ST 12 RE 0 1 OPERATOR12
To Next Page
Loading...
