Positive ACK Message Syntax
Serial Data Export
3-24 Efficia CM Series Data Export Guide
Positive ACK Message Syntax
The Positive ACK message is sent by the server back to the Efficia CM Series monitor. It
acknowledges that the message was received and validated.
Positive ACK Message Segments
The following table describes the segments within the ACK message.
The following syntax message information represents the profile for the receiver. Any
message segment not supported is ignored. RE elements (required, but can be empty)
will be used, if valid, but ignored otherwise.
Note — Each message segment consists of a variable number of lines, each ending with
a carriage return character. In the examples, long lines are broken for display
purposes, and the carriage return character is indicated by <CR>.
Example:
The following example shows a Positive ACK message sent by the server back to the
monitor to acknowledge that the message was received and validated.
MSH|^~\&|||||20140510124500||ACK^^ACK_ALL|EXAMPLE123|P|2.4<CR>
MSA|AA|MONITORABC000000002D<CR>
2 Message
Control ID
Contains the
message control
ID of the
initiating
message (QRY).
ST 20 RE 1 1 MONITORABC000000002
D
3 Text
Message
If the exported
record contains
an error, the
server can send
a text message
describing the
error.
ST 80 RE 0 1 Incorrect Patient
ID
Seq Field Description DT Len Usage Min Max Table Sample Value
Segment Description Usage Min Max
MSH Message Header R 1 1
MSA Message Acknowledgement R 1 1
To Next Page
Loading...
