Philips Efficia CM Series - MDIL Coding; Parameters and Unit Sources

Serial Data Export
Efficia CM Series Data Export Guide 3-27
MDIL Coding
MDIL Coding
The Efficia CM Series monitor uses numeric codes from the Medical Device Interface
Language (MDIL) standard to uniquely identify parameters and unit sources.
Parameters and Unit Sources
The MDIL identifiers use the following format:
<Partition>-<TermCode>
The values for the Partition and TermCode are hexadecimal values between 0x0000 and
0xffff, which are separated in the output with a “-” character.
Partition may be one of the following values:
• 0x0002 - SCADA partition
• 0x0401 - EMFC partition
• 0x0004 - Dimension partition (for units)
Note — The label strings are provided in English only. The strings are not translated into
other languages. Philips recommends that for parameter identification, you use
the numeric parameter identifiers instead of parameter labels.
The following table lists the MDIL codes for Efficia CM Series monitor parameters. Only
parameters that are available on your monitor are exported.
MDIL Code Parameter Label Description
0002-4bb8 SpO2 Oxygen saturation of arterial blood
0002-4a05 NBPs Non-invasive blood pressure (systolic)
0002-4a06 NBPd Non-invasive blood pressure (diastolic)
0002-4a07 NBPm Non-invasive blood pressure (mean)
0002-4182 HR Heart Rate
0002-480a Pulse Pulse Rate
0002-4a15 ABPs Arterial blood pressure (systolic)
0002-4a16 ABPd Arterial blood pressure (diastolic)
0002-4a17 ABPm Arterial blood pressure (MAP)
0002-4a1d PAPs Pulmonary artery pressure (systolic)
0002-4a1e PAPd Pulmonary artery pressure (diastolic)
0002-4a1f PAPm Pulmonary artery pressure (MAP)
0002-4a47 CVPm Central venous pressure (mean)
0002-50b0 etCO2 End tidal CO
2
concentration