C-1
Appendix C. Parts and accessories
This appendix lists parts and accessories supplied by Philips that are
compatible with the Respironics V60/V60 Plus Ventilator. All parts and
accessories are not available in all markets.
WARNING: Avoid adding resistive circuit components on the patient side of the
proximal pressure line. Such components may defeat the disconnect alarm.
NOTE: Resistive components can include but are not limited to HMEs,
proximal flow sensors, a filter at the patient connection, or a narrow
diameter circuit attached to a mask.
NOTE: To ensure the correct performance of the ventilator and the accuracy
of patient data, we recommend you use only Respironics-approved
accessories with the ventilator.
For the most current list of approved accessories plus comprehensive ordering
information for compatible parts available from Philips, contact your Philips
representative or refer to the V60/V60 Plus ordering and accessories guide
(downloadable from philips.com/ifu or philips.com/hrcmanuals).
To Next Page
Loading...
