Philips Xenium - Managing Calls; Answering and Ending Calls

Using your phone
16
Answering and ending a call
When receiving a call, the phone rings, the animation and
Incoming call
appear
on the display, and the green LED flashes. Depending on your subscription, the caller’s number
may be displayed, if your correspondent has enabled this information to be transmitted. If this
number is in the Names list, the corresponding name shall be displayed instead of the number.
L
NOTES:
1. The phone will not ring if the ringer is deactivated (see page 20).
2. If you have a Vibra Battery you may activate the vibrator function to be discretely warned of incoming calls (see
Vibrator page 39).
3. If you have selected Any Key Answer (see page 47), you can accept a call by pressing any key (except )
or by pressing the Pilot Key.
• To answer a call you can either:
• press .
• press the Pilot Key , a carousel with the following options appears:
• Silent ringer
The ringer volume of this incoming call is set to silent and the phone goes back to
the incoming call screen.
• Accept call
• Reject call
• To hang up a call you can either :
• press .
• press the Pilot Key , a carousel appears:
•select
End Call
and confirm.
• If you want to reject the call, press .
The caller hears the busy tone.
If you have activated “Call forward when busy” (see page 46), the call is diverted to the
selected number (your voice mailbox, for example)
Silent
Accept call
Reject call
End call