Use of network services
51
Interrogating your answering machine (example):
To hear all messages (code 3, say) on your answering machine (password 8421) at phone
number 12345678, you could call:
12345678w8421p3.
The phone dials 12345678 and waits for the call to connect. When connected, the phone
transmits 8421 (the password), pauses 2.5 seconds, and then sends the last digit.
If you find that 2.5 seconds is not long enough for your needs, you can enter several pause
characters one after the other to increase the pause time.
Making a second call
You can make a second call during an active call or during a call on hold. You can switch between
the two calls.
L
NOTES:
The second number can be dialled either from the keypad or from:
• the Names list, by pressing the Pilot Key then
Names
• the Call list, by pressing the Pilot Key , then selecting
Call
list
.
Depending on the subscriber’s card.
* Depending on the country (see “Charge rate” page 35).
• Dial a number then press .
The first call is placed on hold and the number is displayed at the bottom of the screen.
The second number is then dialled.
• To toggle between the two calls, press the Pilot Key then select
Switch
calls
.
Each time that you toggle from one call to another, the active call is placed on hold and
the call which was on hold is activated.
• To hang up the active line, press .
The active line is hung up and the call on hold remains on hold.
• To end the call on hold, use Switch calls to reach it, then press .
1.29 GBP*
To Next Page
Loading...
Need help?
General
