Philips Xenium User Manual

Before first use
3
Before first use
Your very first call
Turn the phone face down
L
NOTE:
A new battery is not completely charged (see “Charging the battery” page 12).
1 Insert the micro-SIM card.
Remove the micro-SIM card from the Sim card.
Push the metal retaining clip to the right and lift the cardholder. Slide in the SIM card
between the retaining clip and the plastic tongue with the cut corner of the card as shown
on the drawing. Close the cardholder and push the retaining clip to the left.
2 Insert the battery
For optimum performance follow the instructions on page 12. Place the battery on the
back of the phone (battery connectors downwards, the top near the arrow inside the
case). Then push the battery into place in the direction of the antenna.

Philips Xenium Specifications

General

Loudspeaker	Yes
Call Records	Yes
Radio	FM radio
SIM	Mini-SIM
Display Type	TFT, 256K colors
Card Slot	microSD (dedicated slot)
Phonebook	Yes
Alert Types	Vibration; MP3 ringtones
USB	microUSB 2.0
Messaging	SMS, MMS, Email
Games	Yes