EasyManuals Logo

Philips Xenium User Manual

Philips Xenium
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
Using your phone
20
Locking the keypad
You can lock the keypad to protect the keys from being pressed accidentally (for example, when
the phone is in your pocket).
In idle screen:
L
NOTES:
1. The emergency number is available even when the keypad is locked (dial 112) and you can still receive calls.
2. To switch the phone off, you must first unlock the keypad.
3. Immediate keypad lock can be assigned to a corresponding Hotkey (see page 44).
Unlocking the keypad
With the keypad locked:
L
NOTES:
1. It is possible to accept or reject a call even when the keypad is locked. The keypad is unlocked automatically
when the phone receives a call, and then re-locks again once the call is finished.
2. If you choose to lock the keypad with a delay, it will be permanently locked (after that delay). If you unlock
the keypad by moving the Pilot Key upwards then downwards , it will be temporarily unlocked while
you use your phone. The keypad will be locked again after the delay you previously selected.
Activate/deactivate the silent mode
If you do not want your phone to ring when you receive a call, activate the silent ringer.
If you receive a call while the silent mode is activated, the symbol flashes, the green
LED flashes quickly, and the display shows
Incoming call
, but the phone does not ring.
In idle screen:
L
NOTE
Silent mode can be assigned to a hotkey (see page 44).
Press the Pilot Key
in the
Settings
menu, select
Security
,
Keypad
lock
. Move the Pilot Key to select immediate or delayed lock. When the
keypad is locked appears on the screen.
In idle mode, with a long press on the key, you can also activate the keypad
lock.
Move the Pilot Key upwards
then downwards .
The keypad is unlocked.
With a long press on the key, you can also deactivate the keypad lock.
Press the Pilot Key , select the
Settings
menu,
Sounds
,
Ringer
volume
, then, with the Pilot Key, adjust
Ringer volume
to silent.
Press the Pilot Key to confirm.
The ringer is deactivated. To reactivate the ringer, repeat the above sequence and select
the required volume.

Table of Contents

Other manuals for Philips Xenium

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Philips Xenium and is the answer not in the manual?

Philips Xenium Specifications

General IconGeneral
LoudspeakerYes
Call RecordsYes
RadioFM radio
SIMMini-SIM
Display TypeTFT, 256K colors
Card SlotmicroSD (dedicated slot)
PhonebookYes
Alert TypesVibration; MP3 ringtones
USBmicroUSB 2.0
MessagingSMS, MMS, Email
GamesYes

Related product manuals