Use of network services
52
Answering a second call
You are able to receive another call when already in communication (if this feature is available
on your network). When you receive a second call the phone emits an alert beep and the
screen displays
Call waiting
(see Call waiting menu, page 47).
L
NOTES:
1. If you wish also to answer the incoming call, press , to reject the incoming call, press
.
2. If you have activated call forwarding ‘If Busy’ (see page 46), you will never receive second calls since they are
always forwarded when the line is busy.
Answering a third call
(Subscription
dependent)
While in communication and one call being on hold, you may receive a third call.
The phone emits an alert beep. You can either end one of the communications before being
able to answer the third or introduce the calling party into a conference (see "Conference Call
below). This service is limited to two current communications (one active and one on hold).
• If you receive a second call, press the Pilot Key , then you can:
- accept the second call, the first one is put on hold, the second one is active. If you
want to toggle between the two calls, press the Pilot Key then select
Switch
calls
. Each time you toggle from one call to another, the active call is put on hold
and the call which was on hold is then activated. If you choose to introduce the new
correspondent into a conference press the Pilot Key and select
.
- reject the second call
- end the active call, then your incoming call is ringing.
Conference
To Next Page
Loading...
Need help?
General
