Need help?Do you have a question about the Phoenix Contact CAPAROC Series and is the answer not in the manual?
General| Mounting Type | DIN Rail |
|---|---|
| Approvals | UL, CSA, IEC |
| Adjustable Trip Current | Yes |
| Rated current | 0.5 A |
| Operating temperature | -25 °C |
| Standards | IEC 60947-2 |
Explains symbols and signal words used for warnings.
Defines the necessary qualifications for users of the product.
Describes the intended applications and limitations of the product.
Lists available documentation and how to access it online.
Introduces the CAPAROC system as a modular electronic circuit breaker.
Details the physical structure and assembly of the CAPAROC system.
Provides information on product certifications and approvals.
Gives an overview of the different types of CAPAROC modules available.
Covers guidelines for safe and proper transportation of the device.
Specifies requirements for storing the CAPAROC modules.
Outlines the procedure for safely unpacking the delivered items.
Presents essential safety warnings for mounting and removing modules.
Provides fundamental information and prerequisites for mounting.
Details the step-by-step process for mounting modules onto the DIN rail.
Describes how to safely remove modules from the system.
Explains the procedure for replacing a module within the system.
Specifies required distances for proper ventilation and installation.
Details how to connect network and signal cables using push-in technology.
Covers requirements and procedures for connecting the power supply.
Explains how to disconnect and remove cables from the terminals.
Guides on setting the nominal current for circuit breaker channels.
Explains how to connect loads to the circuit breaker modules.
Describes the diagnostic and status LEDs on the power and protective modules.
Explains the cyclic process data exchanged between the system and the controller.
Details parameters and acyclic data accessible via the PDI channel.
Describes the functionality of the web server for system monitoring.
Provides general information about updating the CAPAROC PM PN firmware.
Outlines the steps to prepare for the firmware update process.
Details the procedure for performing the firmware update on the device.
Guides on how to replace a defective CAPAROC module.
States that repairs must be done by Phoenix Contact and not to open the housing.
Confirms that CAPAROC modules are maintenance-free.
Provides instructions for decommissioning and proper disposal of the device.
Lists all figures included in the document with their respective page numbers.
Lists all tables included in the document with their respective page numbers.
To Next Page
