CAPAROC system
6 / 66
PHOENIX CONTACT 109745_en_01
1.3 Field of application of the product
1.3.1 Intended use
CAPAROC is a modular circuit breaker system. The devices correspond to protection class
IP20. They are intended for use in closed control cabinets or control boxes (junction boxes)
with IP54 degree of protection or higher.
The devices are designed for use in industrial environments.
1.3.2 Product changes
Modifications to the device hardware are not permitted. Modifications to the firmware are
only permitted by means of firmware updates provided by Phoenix Contact.
Incorrect operation or modifications to the device can endanger your safety or damage the
device. Do not repair the device yourself. If the device is defective, please contact
Phoenix Contact.
1.4 Available documents
1.4.1 Documentation on the Internet
The documentation can be downloaded at phoenixcontact.net/products. Here you will find
information on each product. You can obtain a summary of the technical data by selecting
“Generate product PDF”; other important documents can be found on the “Downloads” tab.
Generate product PDF Click the “Generate product PDF” button to receive selected up-to-date information. This
provides a brief overview of the module. The generated PDF file contains the essential prod-
uct information. If you require further information, you can use the “Downloads” tab.
Downloads On the “Downloads” tab, you can access the complete documentation and all other down-
loads related to a product. Module-specific documentation can be found in the download
area for the corresponding module.
Table 1-1 Available documents
Document Contents
User manual This user manual is the generic system manual for
CAPAROC. It describes the CAPAROC product group and
everything about mounting, removal, and wiring of
CAPAROC modules.
Installation notes The installation notes are included with every power module
and are available to download via the website.
To Next Page
Loading...
Need help?
General
