Phoenix Contact FL SWITCH 2005 Installation And Startup Guide

Properties of the devices
108997_en_04 PHOENIX CONTACT 11 / 226
2.1.2 FL NAT 2xxx device versions
2.1.3 Description of Ethernet interfaces
The properties of the Ethernet interfaces of the FL SWITCH 2000 and FL NAT 2000 product
families described below all meet the requirements of the IE 802.3 specification.
Copper ports:
– TX ports (RJ45), 10/100 Mbps (versions 20xx, 22xx, 24xx)
– TX ports (RJ45), 10/100/1000 Mbps (versions 21xx, 23xx, 25xx)
– TX ports (M12), 10/100 Mbps (versions 26xx)
– TX ports (M12), 10/100/1000 Mbps (versions 27xx)
Fiberglass ports:
– FO ports (ST duplex, SC duplex), 100 Mbps (versions 22xx)
– SFP ports (SFX), 100 Mbps (versions 22xx, 24xx)
– SFP ports (SFP), 100/1000 Mbps (versions 23xx, 25xx)
FL SWITCH 2514-2SFP 14 x RJ45 2 x SFP
FL SWITCH 2514-2SFP PN PROFINET mode 14 x RJ45 2 x SFP
FL SWITCH 2512-2GC-2SFP 12 x RJ45 2 x combo,
2 x SFP
FL SWITCH 2608 8 x M12
(D-coded)
FL SWITCH 2608 PN PROFINET mode 8 x M12
(D-coded)
FL SWITCH 2708 8 x M12
(X-coded)
FL SWITCH 2708 PN PROFINET mode 8 x M12
(X-coded)
Order designation Pre-configuration in
factory default state
Copper ports Fiberglass ports
10/100
Mbps
10/100/1000
Mbps
100
Mbps
100/1000
Mbps
Table 2-1 Device versions
Order designation Copper ports Fiberglass ports
10/100 Mbps 10/100/1000 Mbps 100 Mbps 100/1000 Mbps
FL NAT 2008 8 x RJ45
FL NAT 2208 8 x RJ45
FL NAT 2304-2GC-2SFP 4 x RJ45 2 x combo, 2 x SFP

Phoenix Contact FL SWITCH 2005 Specifications

General

Brand	Phoenix Contact
Model	FL SWITCH 2005
Category	Switch
Language	English