FL SWITCH 2000 / FL NAT 2000
12 / 226
PHOENIX CONTACT 108997_en_04
2.2 Overview table of the functions
The functions listed in Table 2-2 are up to date at the time of publication of this user
manual. For information on the date of publication of individual functions, please refer to
the firmware release note. This can be downloaded as part of the software package in the
firmware update area on the product web page (e.g., http://phoenixcontact.net/prod-
uct/2702324).
Table 2-2 Device functions
FL SWITCH / FL NAT
20xx 21xx 22xx 23xx 24xx 25xx
25xx/K1
26xx 27xx
Alarm output/signal contact No Yes No
Temperature range 0°C ... +60°C -40°C ... +70°C
Data transmission
Jumbo frames No Yes No Yes No Yes Yes No Yes
Supply voltage
Supply voltage range 18 ... 32
V DC
12 ... 57
V DC
19.2 ... 32
V DC
12 ... 32
V DC
9 ... 57
V DC
Redundant power supply No Yes
Filter functions
Quality of Service Yes Yes
DSCP/Diffserv Yes Yes
VLAN Yes Yes
Multicast/IGMP snooping Yes Yes
Redundancy
Rapid Spanning Tree (RSTP) Yes Yes
MRP manager/client No/yes Yes (optional)/Yes
Fast Ring Detection (FRD) No Yes
Large Tree Support No Yes
Link Aggregation (LACP) No Yes
Management functions
Role-based user management Yes Yes
Port configuration Yes Yes
Address Conflict Detection (ACD) Yes Yes
DHCP server Port-based Pool/port-based, option 82
Command Line Interface (CLI) Yes Yes
To Next Page
Loading...
Need help?
General
