EasyManua.ls Logo

Piazzetta MP 973 - 2 Technical Characteristics and Specifications; Technical Characteristics; Product Identification Data

Piazzetta MP 973
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Front: in grey enamelled steel
Interior: in steel
Bafe plate and hearth: in cast iron
Grate: in cast iron
Door: in cast iron with ceramic glass heat resistant up to 750°C
Handle: in enamelled steel, concealed ush with front
Control panel: remote control with LCD and digital control panel on stove
Timer thermostat: standard with daily, weekly and weekend programming modes divided into two time bands
Power setting: from 1 to 5
Ash drawer: removable
Fuel: natural pure wood pellets (see section FUEL”)
Heating: forced ventilation with the Multifuoco System with two fans and possibility of separate operation, four fan settings,
possibility of operation with room temperature setting as measured by the remote control (see section “MULTICOMFORT”),
front hot air outlet at bottom with two bafes to separate ow, two outlets at rear for ducting if required (see section
MULTIFUOCO SYSTEM”).
DT2010314-01
2.1 TEChNICAL ChARACTERISTICS
2.0 TEChNICAL ChARACTERISTICS ANd SPECIFICATIONS
Every product is identied by a rating plate showing the model and the performance of the appliance as well as a plate giving the serial number.
Both plates are located on the underside of the hopper lid.
A label bearing the serial number is also applied on the cover last page of the “Installation, operation and maintenance” booklet.
Always give the information shown on these plates to the dealer or the Service Centre when requesting service or spare parts.
DT2011765-00
2.2 PROdUCT IdENTIFICATION dATA
PRODUCT
NAME
SERIAL NUMBER
PRODUCT
IDENTIFICATION
PLATES
Fig. 24
Fig. 25
H072047UK0 / DT2001513 – 04
14
English
DT2011833-00
DT2030624-00 DT2032592-00

Table of Contents

Related product manuals