MEMORY COUNTER
Function Action Display message
Selection of
parameter menu
Press the MENU key, with the SELECT MENU key select PARAMETER
MENU and conrm by pressing the SET key.
MENU
PARAMETER
MEMORY
COUNTERS
HOURS
TOTAL
00000
HOURS
PARTIAL
00000
NUMBER
STARTS
00000
E7
MEM - AL - 1
Selection of hour
counter memory
Press the SELECT MENU key and scroll through the menu until the readout
MEMORY COUNTERS appears.
Conrm by pressing SET.
HOURS
TOTAL
00000
HOURS
PARTIAL
00000
NUMBER
STARTS
00000
E7
MEM - AL - 1
1
Selection of total
hours
The readout TOTAL HOURS appears in the central part of the display and
total hours of operation on the bottom line.
Press the SELECT MENU key.
MENU
PARAMETER
MEMORY
COUNTERS
HOURS
PARTIAL
00000
NUMBER
STARTS
00000
E7
MEM - AL - 1
1
1
Selection of partial
hours
The readout of the PARTIAL HOURS appears in the central part of the
display and partial hours of operation on the bottom line.
Press the SELECT MENU key.
MENU
PARAMETER
MEMORY
COUNTERS
HOURS
TOTAL
00000
NUMBER
STARTS
00000
E7
MEM - AL - 1
1
1
1
Selection of number
of starts
The readout of the NUMBER START appears in the central part of the
display and the number of ignitions on the bottom line.
Press the SELECT MENU key.
MENU
PARAMETER
MEMORY
COUNTERS
HOURS
TOTAL
00000
HOURS
PARTIAL
00000
Selection of last 5
alarms
The last 5 alarms (e.g. NO LIT, SAFETY THERMAL, SAFETY SMOKE ….)
appear in the central part of the display and the order in which the alarms
occurred on the bottom line.
Press the ESC key to return to the initial display.
MENU
PARAMETER
MEMORY
COUNTERS
HOURS
TOTAL
00000
HOURS
PARTIAL
00000
NUMBER
STARTS
00000
1
DT2040100-00
DT2011866-00
6.17 PARAMETER MENU
The User can only interact with the MEMORY COUNTERS in the parameter menu as described in the tables below.
The other parameters can only be used by an authorised service centre.
H072047UK0 / DT2001513 – 04
49
To Next Page
Loading...
