Piazzetta MP 973 - Loading the Auger; Thermostat

6.10 LOAdING ThE AUGER
a When the stove is new or the pellets have been completely used up, prior to start-up and ignition, carry out the LOADING AUGER
function.
This function allows auger loading and favours light up because the pellets will be immediately unloaded into the brazier.
AUGER LOADING is possible only when the stove is in the OFF state.
LOADING AUGER
Function Action Display message
Select loading auger
Press the SELECT MENU key and scroll through the menu until the readout
LOADING AUGER appears.
Conrm by pressing SET.
MENU
PARAMETER
LOADING
AUGER
12:0022
IN
LOAD
.
c
AUGER
LOADED
1
1
1
1
The readout WAITING appears on the display during loading.
MENU
PARAMETER
LOADING
AUGER
12:0022
IN
LOAD
.
c
AUGER
LOADED
1
1
1
1
After a set time the auger will be lled and the readout AUGER LOADED
appears.
MENU
PARAMETER
LOADING
AUGER
12:0022
IN
LOAD
.
c
AUGER
LOADED
1
1
1
1
DT2040101-00
DT2010242-05
6.11 ThERMOSTAT
The function of the thermostat is to allow the user to program the stove so that it is switched on and off independently without the manual
intervention of an operator.
This thermostat allows you to select the daily, weekly and weekend programs with a maximum of 2 cycles in two different time slots.
For example: 1st cycle: from 06.00h to 09.00h.
2nd cycle: from 20.30h to 23.00h.
• In the DAY program 2 time slots established can be engaged or disabled for all days of the week.
For example: the user wants the stove to switch on the stove from 06:00 to 09:00 every day
• In the WEEK program the 2 time slots established can be engaged or disabled for all days of the week.
For example: the user wants the stove to switch on from 06:00 to 09:00 on Monday and Tuesday, but not on Wednesday, and so on.
• In the WEEK-END program the 2 time slots established can be engaged or disabled for Friday, Saturday and Sunday.
For example: the user wants the stove to switch on from 06:00h to 09:00h on Friday, Saturday, but not on Sunday.
H072047UK0 / DT2001513 – 04
39
English