7 General
Installation manual PMCprimo Drive2
Page 13
7.4 Instrument description
7.4.1 Scope of delivery
When you order a PMCprimo Drive2 from us, you will receive:
• PMCprimo Drive2 - size 01..20
• Mating connectors X3, X4, X0A, X0B, X7, X8
The mating motor connector X9 is not part of the package!
• Assembly, installation- and commissioning instructions
• Setup software package PMCprimo Motion Control Tools on CD-ROM
• Software manual PDrive and PMCprimo programming manual on CD-ROM
7.4.2 Accessories
• Servo motor PMCtendo AC1 or PMCtendo AC2
• Motor cable (pre-assembled), or both motor connectors separately with motor cable as cut-off
length
• Feedback cable (pre-assembled) or both feedback connectors separately with feedback cable
as cut-off length
• External regen resistor
• Communication cable to the PC for parameterisation (Null modem cable)
• MODBUS panel and communication cable; Panel (2 line till Touch screen)
• CAN cables
• Software keys for Motion Generator or Soft-PLC
• Ethernet cables
• Adapter cable Modbus/Profibus
• Expansion card (page 88)
• CompactFlash Cards
• Profibus DPS-small IC
• Master encoder
• Expansion board (page 88)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
General