Setting up a UPS account
This procedure describes how to set up a UPS carrier account.
1. Select the Print Shipping Label button on the Home screen. Select the UPScarrier.Select the
UPScarrier button on the Home screen. This opens the Add UPS Account screen.
l If you do not have a UPS account, Select the Create New UPSAccount button. This
provides you with a link to the UPSweb site where you can sign up and get a UPS account
number.
l If you already have a UPS account, Select the Enter My UPSAccount button.
2. Enter your 6-digit UPS account number.
3. Click the Account Type and select the appropriate type from the drop-down menu.
4. Enter your recent invoice information, or enter the name and address used to set up your
UPSaccount:
l Use your most recent invoice number if you have it. If you’ve shipped with UPS in the past 90
days, UPS will have issued you an invoice and requires that you input that information here.
You or the account holder in your organization should be able to download it from UPS.com.
l If you don’t have a recent invoice, check the check box for I don’t have a recent invoice.
5. Enter your name and address EXACTLY as they appear on your UPS account.
Note:
For security reasons, the information you enter when adding UPS as a carrier account for your
SendPro® system must match your UPS account’s information exactly. You get 3 attempts to
enter this information correctly before you are locked out of your UPSaccount for 24 hours. After
that, you can try again. To see your UPS account information, refer to your most recent invoice or
sign in to your UPS account and refer to your account’s name and address information as you
enter it into SendPro.
6. To continue, check the check mark for I accept the UPS Technology Agreement.
7. Select the Add Carrier button. You will know your UPS account has been added to SendPro®
when you see the message,"Settings have been saved successfully".
SendPro Online Shipping Solution
Pitney Bowes Operator Guide February,2018 Page 125 of 349
To Next Page
Loading...
