Manual adjustments
You may need to make the following manual adjustments before you run a job.
For all systems:
l Set the Thickness Adjustment Knob
For optional features:
l Adjust the Side Guide
l Set the Wet/Dry Sealer Lever
l Adjust the Drop Stacker
You can pivot the touchscreen display to a convenient position simply by grasping it and moving it up,
down, left or right. If the touchscreen does not respond when you touch it, you can also calibrate the
touchscreen.
Getting started
Pitney Bowes Operator Guide February,2018 Page 33 of 349
To Next Page
Loading...
