Running a Manual Weight Entry job
When you need to use a scale that is not connected to your system, you can still use the system to
calculate the postage for you.
1. Select the Run Mail button in the Mailing tile on the Home screen.
2. Select a job that uses Manual weight entry.
3. Place the mail piece on the detached scale and note its weight.
4. Select the Weighing icon.
a. Ensure the Manual weight entry option is selected.
b. If necessary, change the weighing units.
c. Type in the mail piece weight.
d. Select OK to go back to the Run Mail screen.
5. Select the class of service.
6. Put the mail on the feed deck.
7. Select Start, or if printing to tape, select Tape.
Running mail
Pitney Bowes Operator Guide February,2018 Page 79 of 349
To Next Page
Loading...
