Pitney Bowes Connect+ 2000 - Page 226

4. Select Synchronize clock to synchronize the clock.
5. To turn daylight saving time on or off select On or Off.
Note:
Turn Daylight Saving Time on in the Spring and off in the Autumn.
6. Select the appropriate time zone from the Time Zone list.
7. Select the Home button to return to the Home screen.
Setting system timeouts
System timeouts can be set for your mailing system. You can set any of the system timeouts from five
minutes to four hours, in one minute increments.
l Default Job Timeout: The default job timeout option allows you to specify how much time you
want to allow the system to remain idle before it the default job is reloaded on the Run Mail screen.
The default timeout is 20 minutes. If necessary, this timeout can be disabled.
o
If the ENERGY STAR® shutdown timeout is not feature enabled on your system, the default
job timeout can be set anywhere from one minute to four hours.
o
If the ENERGYSTAR® shutdown timeout is feature enabled on your system, the default job
timeout must be less than or equal to it in duration.
l ENERGY STAR® Shutdown: The ENERGY STAR® shutdown timeout will save money, and
help protect the environment. Use this option to specify how long the system remains inactive
before it goes into "sleep". The default timeout is 40 minutes.Use the power button to turn the
system back on. The ENERGY STAR® shutdown timeout is an optional feature.
l Postage hold - If you run mail using the Attached Scale method and you remove the mail piece
from the scale, a timer begins and when the timer expires, the Run Mail screen displays the
minimum postage amount for the class you selected and the weight returns to zero. You can use
the Postage hold option to set the length of the timer from 10 to 60 seconds. If this option is
selected, you can only adjust the time. You cannot deselect or turn this option off.
l Screen Saver Timeout: The screen saver timeout option allows you to specify how much time
you want to allow the system to remain idle before the screen saver appears. The timeout range is
5 minutes to 4 hours.
System Setup
Pitney Bowes Operator Guide February,2018 Page 226 of 349