Turning off user logins
Note:
Supervisor access rights are required to manage users.
Turning off user logins will disable all system security. Account passwords, if used, will be disabled and all
system functions will be unlocked. User information will be stored on the system, should you want to
enable users again at a later date.
1. Select the Settings button in the Mailing tile on the Home screen.
2. Select System from the list on the left side of the screen.
3. Select Users.
4. On the User setup tab, a check mark appears in the Enable user logins... check box. Select
Enable user logins... to remove the check mark from the check box.
5. A warning message displays. Select Yes, turn off user logins.
Viewing the status of rates, software, features, and graphic updates
1. Select the Settings button in the Mailing tile on the Home screen.
2. Select System from the list on the left side of the screen.
3. Select Configuration.
System Setup
Pitney Bowes Operator Guide February,2018 Page 237 of 349
To Next Page
Loading...
